Ref 03-018 - MULTIWIRE SAW – BM Kodiak 84 Evolution
NEW MACHINE LOCATION - ITALY
PRICE - BY INQUIRE
The multiwire machine of BM, the KODIAK EVOLUTION, is suitable for cutting granite blocks into slabs of various thickness. It is made in different size models, in order to install from 20 up to 84 diamond wires. The machine is exclusively constructed on 4 columns, guaranteeing the best stability and cutting precision. The machine can install diamond wires of diameter 7,3 mm, 6,3 mm and 5,3 mm. The tensioning of the wires is by a BM’s patented system, which guarantee the homogeneous independent tensioning of each diamond wire. The “triangle” structure allows the diamond wire to work only on 3 touching points, reducing to the minimum the stress of the wire during the work. The bigger diameters of the rollers and wheels, reduce the inclination angle of the diamond wire, extending so the life of the wire.
The “KODIAK BM” is construncted on 4 columns. It means the roller-wheels where are located the wires are under strong tension and they are connected to 4 columns, not only 2. With a structure based on n.2 columns, the tensioned set of diamond wires makes a big flexion to the machine frame, so when the tension is removed, they change the position and they would not get it back when they will be tensioned again. So the position of the wires before removing the tension is not the same position they have after giving the tension again. This movement makes a defect on the surface of the slabs called line/step. With a 4 columns gang saw, this problem does not exist because the frame of the machine is much more rigid and when the tension of the wires is being removed, it does not effect the movement of the wires.
BIGGER DIAMETERS:- INCREASE LIFE OF THE WIRE - REDUCTION OF CYCLES PER MINUTE - LONGER LIFE OF THE BEARINGS - BIGGER CONTACT SURFACE OF THE WIRE ON THE RUBBER PROFILE - LESS CONSUMPTION OF RUBBER PROFILE
MADE IN ALLUMINIUM! ONLY 3 CONTACT POINTS
PATENTED TENSIONING BY HYDRAULIC LEVER - An automatic hydraulic
tensioning system provides for each diamond wire a tension up to 250Kg.
HYDRAULIC INDEPENDENT TENSIONING FOR EACH WIRE - A liner insert for the external periphery of the wheel offer protection along with a set of seals for the large D150mm central bearing.
SPECIAL PROFILE OF 14 MM TO BE CHANGED ON THE PULLEYS OF DIAMETER 1000 MM
AND 1500 MM, WITH A SPECIAL JOINT SECTION TO AVOID THE EXIT
THE HYDRAULIC SYSTEM EASES THE INSTALLATION OF THE WIRES, ALLOWING THE MOVEMENT UP TO 9 CM, OF THE ENTIRE GROUP OF WHEEL OF 1500 MM
GUIDING DRUMS RUBBER STRIPS
LEGHT OF THE WIRES, COMPENSATION SYSTEM UP TO 7,5 CM.
Easy insertion system and a stock of preinstalled wires ready for quick mounting
AUTOMATIC LUBRIFICATION SYSTEM
CUSTOM SOFTWARE AND APP FOR TABLET
Multiwire saw machine for granite - BM Kodiak 84 Evolution 84wires